Aurora Bearing Product Catalog 319

www.aurorabearing.com • Fax 630-859-0971 57 MW-M & MG-M SERIES FEMALE ROD ENDS - METRIC General Purpose – Precision (PTFE Liners Available) METRIC * Check for availability. ** See page 5. X Designates metric threads. † Left hand units have identification groove. 1 Tolerance variation: “D” ± .51, “A” ± .51 ‡ Grease fitting not available on this size. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix as designated. Z Zerk type fitting Ex: MW-M10Z F Flush type fitting Ex: MW-M10F T PTFE Liner Ex: MW-M10T * 1 Body - Low carbon steel, protective coated for corrosion resistance. Race - Low carbon steel, protective coated for corrosion resistance. Ball - Alloy steel, heat treated, hard chrome plated. a1 a3 a4 Ball Dia. Ref. C ± 1.00 Thread Right Hand Left Hand† B + .065 - .013 W ± .13 H ± .13 A ± .40 D ± .38 K ± .25 J ± .25 a° Misalign. Angle** Ultimate Radial Static Load Capacity Newtons Approx. Brg. Wt. Grams ROD END NO. DIMENSIONS IN MILLIMETERS ‡MW-M3 ‡MG-M3 3 6 4.75 21 12.50 8 7 7.93 10 M3 X 0.5 13 25 62 4,972 10 MW-M5 MG-M5 5 8 6.25 27 16.00 11 9 11.10 14 M5 X 0.8 14 24 58 7,090 17 MW-M6 MG-M6 6 9 7.00 30 19.00 13 11 12.70 14 M6 X 1.0 13 23 57 10,573 25 MWF-M8 MGF-M8 8 12 8.75 36 22.25 16 14 15.88 17 M8 X 1.0 18 31 53 14,072 40 MW-M8 MG-M8 8 12 8.75 36 22.25 16 14 15.88 17 M8 X 1.25 18 31 53 14,072 40 MWF-M10 MGF-M10 10 14 10.50 43 27.00 19 17 19.05 21 M10 X 1.25 17 28 50 20,603 80 MW-M10 MG-M10 10 14 10.50 43 27.00 19 17 19.05 21 M10 X 1.5 17 28 50 20,603 80 MWF-M12 MGF-M12 12 16 12.00 50 30.00 22 19 22.23 24 M12 X 1.25 17 27 49 18,215 95 MW-M12 MG-M12 12 16 12.00 50 30.00 22 19 22.23 24 M12X1.75 17 27 49 18,215 95 MWF-M14 MGF-M14 14 19 13.50 57 34.75 25 22 25.40 27 M14 X 1.5 21 33 49 29,840 160 MW-M14 MG-M14 14 19 13.50 57 34.75 25 22 25.40 27 M14 X 2.0 21 33 49 29,840 160 MWF-M16 MGF-M16 16 21 14.25 64 38.00 27 22 28.58 33 M16 X 1.5 23 35 52 32,223 215 MW-M16 MG-M16 16 21 14.25 64 38.00 27 22 28.58 33 M16 X 2.0 23 35 52 32,223 215 MW-M18 MG-M18 18 23 16.25 71 42.00 31 27 31.75 36 M18 X 1.5 21 31 49 41,303 300 MWF-M20 MGF-M20 20 25 18.00 77 46.00 34 30 34.93 40 M20 X 1.5 20 29 48 50,952 350 MW-M20 MG-M20 20 25 18.00 77 46.00 34 30 34.93 40 M20 X 2.5 20 29 48 50,952 350 MW-M22 MG-M22 22 28 19.50 86 50.00 37 32 38.10 43 M22 X 1.5 22 33 48 56,238 390 MW-M25 MG-M25 25 31 22.00 95 60.00 42 36 42.86 48 M24 X 2.0 19 31 47 104,435 700 MW-M30 MG-M30 30 37 25.40 104.78 69.85 41.25 38.10 50.80 54 M30 X 2.0 21 33 47 147,238 970

RkJQdWJsaXNoZXIy MTQzNjc=