Aurora Bearing Product Catalog 319

www.aurorabearing.com • Fax 630-859-0971 92 ATW-T & ATG-T FEMALE ROD ENDS SAE Series AS81935/5 (Right Hand) & AS81935/5 (Left Hand) SAE NO. AURORA NO. B + .0000 -.0005 W + .000 -.002 K Ref. Dia. J ± .010 G ± .020 F + .010 -.062 P Max. C Min. Thread UNJF-3B Ball Dia. Ref. H ± .005 A ± .010 D ± .010 O Min. E ± .010 S Right Hand Left Hand Left Hand Right Hand DIMENSIONS IN INCHES M81935/5-03 M81935/5-03L ATW-3T ATG-3T ..1900 .281 .228 1.210 .680 .293 .5625 .329 .430 .375 .188 .312 .406 .750 .625 1/4-28 M81935/5-04 M81935/5-04L ATW-4T ATG-4T .2500 .343 .260 1.338 .827 .364 .6562 .329 .430 .375 .188 .312 .500 .750 .625 1/4-28 M81935/5-05 M81935/5-05L ATW-5T ATG-5T .3125 .375 .291 1.566 .984 .419 .7500 .413 .500 .437 .188 .375 .562 .875 .750 5/16-24 M81935/5-06 M81935/5-06L ATW-6T ATG-6T .3750 .406 .322 1.908 1.131 .475 .8125 .501 .720 .625 .250 .437 .625 1.125 1.000 3/8-24 M81935/5-07 M81935/5-07L ATW-7T ATG-7T .4375 .437 .353 2.125 1.294 .530 .9062 .584 .720 .625 .250 .500 .687 1.250 1.125 7/16-20 M81935/5-08 M81935/5-08L ATW-8T ATG-8T .5000 .500 .400 2.356 1.459 .600 1.0000 .672 1.020 .875 .375 .562 .781 1.375 1.250 1/2-20 M81935/5-10 M81935/5-10L ATW-10T ATG-10T .6250 .625 .510 2.707 1.763 .739 1.1875 .845 1.020 .875 .375 .687 .968 1.500 1.375 5/8-18 M81935/5-12 M81935/5-12L ATW-12T ATG-12T .7500 .750 .603 3.193 2.140 .920 1.4375 1.017 1.300 1.125 .500 .812 1.187 1.750 1.625 3/4-16 M81935/5-14 M81935/5-14L ATW-14T ATG-14T .8750 .875 .713 3.677 2.372 .980 1.5625 1.187 1.375 1.250 .500 .937 1.312 2.062 1.875 7/8-14 M81935/5-16 M81935/5-16L ATW-16T ATG-16T 1.0000 1.000 .807 4.101 2.681 1.118 1.7500 1.356 1.590 1.375 .500 1.062 1.500 2.312 2.125 1-12 Max. Housing I.D. Body - 4340 alloy steel (AMS 6415), heat treated, cadmium plated Race - 17-4 PH stainless steel (AMS 5643), heat treated Ball - 440C stainless steel (AMS 5630), heat treated Liner - AT3200 bearing liner, permanently bonded to race I.D., qualified to SAE-AS81820 Type A NOTES: 1. Temperature Range: -65ºF To +325Fº (-54ºC to +163ºC) 2. Keyslot, when specified, is compatible with locking devices: AS81935/3 for sizes -03 thru -08, and AS14277, NAS513, and NAS1193 for sizes -10 thru -16 3. Keyslot designation “K” sizes -03 thru -08 (rounded slot) and sizes -10 thru -16 (square slot) 4. Keyslot for sizes -03 thru -06 have 2 slots oriented perpendicular to the rod end hoop face (see diagram) 5. Keyslot for sizes -07 thru -16 have 4 slots, 2 slots oriented perpendicular to the rod end hoop face (see diagram) 6. AT 3200 Bearing Liner System is qualified for procurement under SAE-AS81820. 7. Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/5 and are approved for procurement under this specification 8. Non-standard material, dimensional, or configuration specifications (not per the SAE Aerospace Standard Specification) can be provided. Consult factory for additional information 9. The Rod End Bearings listed are available in non PTFE lined, metal on metal configuration (not per the SAE Aerospace Standard Specification), as well as with alternate Aurora Bearing PTFE liner systems. Consult factory for additional information

RkJQdWJsaXNoZXIy MTQzNjc=